Samsung XM2go - Manual (Page 50)

Using Helix with a PC 50
Using Helix with a PC
4. Reboot your PC if necessary, then launch the XM+Napster program from the shortcut on
your desktop.
5. Set up Helix as shown and plug the USB cable into the PC. You can also connect the USB
cable directly between your PC and Helix without using the home cradle, home antenna,
and AC power adapter.
6. Your PC should recognize Helix. Close any file folders that appear on your screen. You can
manage the contents of Helix entirely by using the XM+Napster program.
7. When taking your Helix with you, you must disconnect Helix from the PC by following the
procedure described in “Disconnecting Your Helix from the PC” (page 60).
WARNING: Only use the USB cable supplied in the package. Other USB cables may not allow
your Helix to charge its battery or communicate with your PC.