Southwing SH505 - Manual (Page 5)

5
before turning off.
Changing Volume
Your Headset features tactile volume
buttons that respond simply to finger
contact. Volume adjustments will only
be possible during calls. To increase
the volume, with the Headset on,
press briefly touch Vol+ Sensor [4]. To
decrease the volume, briefly touch the
Vol- Sensor [5]. The Headset will
remember all volume settings even
when it is switched off.
Accepting/rejecting* a call
When the phone rings (ring tone can
be heard in Headset), briefly press the
Push4
TM Button [2] once to accept the
call. Press the Push4 TM Button [2] twice
to reject the call.
Initiating a call from your mobile phone
Dial the number as usual with your
phone. If your Headset is on and the
phone has been correctly paired, your
phone will transfer the call to your
Headset.
Initiating a call with voice dialling
You may be able to initiate the voice
dialling function from your Headset
(your phone will need to support voice
dialling and voice tags need to be
entered). To activate, briefly press the
Push4
TM Button [2]. You will then be
able to speak the name of the person
you wish to call.
Ending a call
Press the Push4 TM Button [2] briefly dur-
ing a call and the call will be ended.
Disconnecting from the phone*
You may wish to disconnect the Head-
set from the phone in order to reduce
battery consumption. To do so, press
the Push4
TM Button 3 times on the
Headset when it is not in an active call.
If you want to pick up a call, you first
need to re-connect the Headset. To do
so, press the Push4
TM Button once
again on the Headset.
Battery life
To conserve battery life, your Headset
features an auto-sleep function. This
function switches the Headset off after
4 hours of inaction. Once your Headset
has entered auto-sleep, it can be
switched on again normally.
When the battery has only 10% charge
remaining, the Headset will produce an
audible warning tone sequence every
time a call is ended. Also the Indicator
Light [2] will start flashing red.
Resetting your Headset
Should your Headset stop responding,
try charging it for a few seconds. Your
Headset should now function again as
normal.
Muting the microphone
During a call, briefly press the Push4 TM
Button [2] twice. A tone will be heard
every 2 seconds during the call to
remind you that the microphone is
muted. Two additional presses of the
Push4
TM Button will reactivate the
microphone.
Transferring a call to the phone*
Press the Push4 TM Button 3 times dur-
ing a call to transfer the call to the
mobile phone. Pressing the Push4
TM
Button [2] once again will transfer the
call back to the Headset.
Last number redialling*
Press Push4 TM Button twice to make