Setup, Step 1: connect your monitor to your computer, Step 1 – Sony CPD-G420S User Manual
Page 6
6
8 2 VOL (volume) control dial (page 8)
This dial controls the volume of the sound from the AUDIO
IN jack.
9 i Headphone jack
This stereo headphone jack is provided for convenient silent
listening in the office or at home.
q; AUDIO IN jack (page 8)
For sound, connect your computer or audio/video equipment
with this jack.
qa Speaker
This hidden monaural speaker is mounted behind the
2 VOL (volume) control dial on the rear of the monitor.
Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Audio cord (stereo miniplug) (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Notes
• Do not touch the pins of the video signal cable connector as this might
bend the pins.
• When connecting the video signal cable, check the alignment of the
HD15 connector. Do not force the connector in the wrong way or the
pins might bend.
x Connecting to an IBM PC/AT or compatible
computer
AC IN
2
1
IBM PC/AT or compatible
computer
to video output