Samsung CM1029B - Manual (Page 12)

10
Cooking/Reheating
This oven is preset at the factory for automatic operation.
1 Make sure the oven is plugged into a properly grounded electrical outlet and
“ON” appears in the display window.
2 Open the door.
The oven lamp will be turned on.
3 Put the food into a suitable container, place it in the centre of the oven and
then close the door securely.
Result:
The oven lamp will go off.
4 Select the desired power level by pressing the Power Level Selector pad.
Result:
The selected power level will be displayed in the display window.
5 Set the desired heating time by pressing the Number pads.
Result:
The selected time is displayed in the display window.
6 Press Start pad:
Result:
The oven lamp and cooling fan will be turned on.
Heating will start.
The time on digital display will count down.
7 When all time has elapsed, the end of cycle Beep Tone will sound 4 times
and all heating will stop. The oven lamp will go off. For 1 min, the display
shows ‘
‘ and the cooling fan will keep working in order to cool down the
interior parts. During the time, the fan will not stop even when you open the
door. 1 min later it will stop and “ON” appears again. Food may be removed
from oven while the fan is still running.
8 Open the door and take the food out.
9 Close the door. The oven lamp will go off.
➢
While in a heating cycle, one press on Stop/Cancel pad stops
the oven. At this time, the Power Check Indicator “ON” starts
blinking and goes off when the Stop/Cancel pad or Start pad is
pressed again. You can restart it by pressing the Start pad or a
second press on Stop/Cancel pad will cancel the selected
program. While NOT in a heating cycle, one tap on Stop/Cancel
pad cancels the selected program. You can press Start/30sec.+
pad one or more times in order to add the cooking time by 30
seconds. But you can not exceed the maximum time per power
level allowed for power level selected.
➢ When you first plug in the power cord, the oven
beeps once and all the indicators are displayed
in the display window for 5 sec.
➢ When heating cycle is completed and you open
the door, the oven lamp and the cooling fan
automatically turn on and goes off 1 min later.
➢ When you open the door during a heating cycle,
the oven stops operating and the oven lamp as
well as the cooling fan automatically turns on for
1 min and goes off 1 min later. If you leave the
oven door open for more than 1 min, the oven
beeps once every minute and after 5 min the
power source check indicator ‘ON’ appears in
the display window.
CM1029B-2 6/14/00 10:24 AM Page 10