Samsung CM1029B - Manual (Page 15)

13
Memory Pads Programming
1 Press PROGRAM pad(hold for more than 2 seconds).
Result: PROG indicator appears in the digital display.
2 Press appropriate NUMBER pad for the desired memory number.
Result:
Selected memory program code appears below the PROGRAM
indicator.
3 Select power level by pressing the POWER LEVEL or DEFROST pad.
Result:
Default power level HIGH appears in the display at first press of
the POWER LEVEL pad.
➢
Press the POWER LEVEL or DEFROST pad one or more times until
you get the desired power level.
4 Press NUMBER pads to set the cooking time.
➢
The maximum time according to each cooking power level can be
referred to in the title “Power Levels and Time Variations” on page
11. The NUMBER pads will not operate or respond when you press
a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum
time allowed on the chosen program. The power level indicator will
flash and it is advisable to press Stop/Cancel and to enter a new
power level and cooking time.
5 Press PROGRAM pad(hold for more than 2 seconds)
Result: PROG indicator and memory number indicator blink 3 times in the
digital display with a beep sound. And then the display goes blank.
Caution: Be sure to press the pads firmly in the right position.
6 When you want to program more, repeat the procedures above again.
➢
Memory programs are available for up to 20 items. Make sure the
unit is properly programmed.
After programming is finished, all you have to do for memory cooking
is to press the NUMBER pad. Then the selected memory program
automatically starts cooking.
CM1029B-2 6/14/00 10:24 AM Page 13