Create a new network connection – Sierra Wireless RAVEN IDEN 20070914 User Manual
Page 19
Raven iDEN
19
20070914
Once the DUN connection is initiated, by default, it will take
over as the “default route” for network communication and
specifically for Internet access. If you want the two connections
to co‐exist, you will need to de‐select “Use default gateway on
remote network” (described later) and use the route command
in Windows to setup routing through the modem properly.
This guide does not provide information on the route
command. You may need to consult with your network admin‐
istrator to properly configure routing.
1. Create a new network connection.
a.
Select Start > Connect To > Show All Connections to open
the Network Connections window.
Figure 0-24: Windows : Start menu
b.
Select Create a New Connection under Network Tasks in
the menu area on the left.