Using the sleep timer, Recording, Using the sleep timer recording – Sony STR-DH810 User Manual
Page 45: Recording onto a cd-r, Prepare the playback component for playing, Prepare the recording component
45
GB
B
a
si
c Op
er
a
tio
ns
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press AMP, then press SLEEP
repeatedly while the power is on.
“SLEEP” lights up in the display.
Each time you press SLEEP, the display
changes cyclically as follows:
0:30:00
t 1:00:00 t 1:30:00 t
2
:
00
:
00
t OFF
Tips
• To check the remaining time before the receiver
turns off, press SLEEP. The remaining time
appears on the display. If you press SLEEP again,
the Sleep Timer will be canceled.
• You can also set the Sleep Timer by using the
“SLEEP” in SYSTEM menu.
Recording
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
Prepare the playback
component for playing.
For example, tune to the radio station you
want to record (page 46).
3
Prepare the recording
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
4
Start recording on the
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R AUDIO OUT jacks.
.
m
M
>
X
x
BD
DVD
SAT/
CATV
VIDEO 1
VIDEO 2
HDMI 3
HDMI 2
HDMI 1
HDMI 4
SA-CD/
CD
TUNER
DMPORT
<
<
MENU
O
TV
SLEEP
AMP
Recording onto a CD-R