Sony STR-DH810 - Manual (Page 64)

64 GB
6
Press V/v repeatedly to select
the setting you want, then
press .
• START: The S-AIR main unit starts
pairing. “SEARCHING” flashes on the
display.
• CONDITION: You can check the
current ID. When the pairing setting is
not made, “NO PAIRING” appears on
the display.
7
Start pairing of the S-AIR sub
unit.
Refer to the operating instructions
supplied with the surround amplifier and
S-AIR receiver respectively.
8
Pairing completed.
“COMPLETE” appears on the display.
To exit the menu
Press MENU/HOME or AMP MENU.
Note
Perform the pairing within several minutes after you
select “START” in step 6. Otherwise, the pairing is
canceled automatically and “INCOMPLETE”
appears on the display.
To cancel pairing
Reset the ID of the S-AIR main unit.
For details, see “To set the ID of the S-AIR
main unit” (page 62). You can select the same
ID as before.
Enjoying the system’s
sound in another room
(For the S-AIR receiver only (not
supplied))
You can enjoy the system’s sound in another
room by using the S-AIR receiver. The S-AIR
receiver can be placed in another room for
enjoying the system’s sound there.
For details of the S-AIR receiver, refer to the
operating instructions supplied with the S-AIR
receiver.
1
Set the ID of the S-AIR receiver
to match the ID of the S-AIR
main unit.
• To set the ID of the S-AIR main unit,
see “To set the ID of the S-AIR main
unit” (page 62).
• To set the ID of the S-AIR receiver,
refer to the operating instructions
supplied with the S-AIR receiver.
Notes
• When you are using another S-AIR sub unit,
such as a surround amplifier, do not change
the ID of the S-AIR main unit. Set the ID of
the S-AIR receiver to match the ID of the
S-AIR main unit.
• When you pair the S-AIR main unit and
another S-AIR sub unit, such as a surround
amplifier, you also need to pair the S-AIR
main unit and the S-AIR receiver. For details,
see “Pairing the S-AIR main unit with a
specific S-AIR sub unit (Pairing operation)”
(page 63).
2
Press AMP MENU.
MENU
O
AMP
MENU
,
V/v/B/b