Sanyo ICR-B35 - Manual (Page 19)

-18-
Erasing one folder memory
1.
Press the ERASE button twice. The folder
name, file numbers and “ERASE” blink.
2. While the display is blinking, press the TIME/
SET button. “ERASE” appears briefly. All
memories in the selected folder are erased.
Erasing all memories
1.
Press the ERASE button three times. “MEMOR
ALL ERASE” blinks.
2. While “MEMOR ALL ERASE” is blinking,
press the TIME/SET button. “ERASE” ap-
pears briefly. All memories in all folders are
erased.
Partial erasing (A-B erasing)
1.
Press the c or d button to select the file
number.
2. Press the a button to start playback.
3. Press the a button again to pause at the start-
ing point you want to erase (point A).
4. Press the ERASE button. “ERASE START”
blinks.
5. While “ERASE START” is blinking, press the
TIME/SET button. “ERASE” remains. Play-
back starts.
6. Press the ERASE button at the ending point
you want to erase (point B). “ERASE END”
blinks.
7. While “ERASE END” is blinking, press the
TIME/SET button. “ERASE” appears briefly.
The section between points A and B in the
selected file is erased. Playback pause is is-
sued.