Sanyo ICR-B35 - Manual (Page 23)

-22-
TROUBLESHOOTING GUIDE
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACCTION
The unit does not operate.
The batteries are discharged or not installed.
Insert two new “AAA” batteries.
“ ” appears.
The batteries are discharged.
Insert two new “AAA” batteries.
“HOLD” appears when the operation button is pressed.
Hold function is set.
Set the HOLD switch to OFF.
No sound.
The earphone is plugged in.
Unplug the earphone.
The volume is turned down completely.
Press the + VOLUME button to adjust the
sound level.
Cannot erase.
The erasing guard is set. (“ ” appears.)
Cancel the erasing guard. Refer to “Erasing
guard”.
Playback speed is too fast or too slow.
The sound was recorded with the REC LONG mode.
Set the PLAY SPEED switch (back of the unit)
to STD.
Operation or display is not normal.
The unit must be reset.
See “WHAT TO DO IF…” on page 2.