Shindaiwa EB802 - Manual (Page 6)

6
Specifi cations
Model EB802 EB802RT
Dry Weight (without Blower Tubes) 10.5 kg 10.4 kg
Dimensions (LxWxH) 372 x 458 x 600 mm 372 x 457 x 545 mm
Engine Type 2 cycle air-cooled gasoline engine, vertical-cylinder
Bore & Stroke 49 x 42 mm (1.93 x 1.65 inches)
Displacement 79.2 cc (4.83 cu. inches)
Fuel/Oil Ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil
Carburetor Diaphragm Type
Ignition CDI (Capacitor Discharge Ignition)
Spark Plug NGK BPMR8Y
Starting Recoil Starter
Stopping Push Button Switch (Grounding type) Slide Switch (Grounding type)
Fuel Tank Capacity 2.0 liters (67.6 oz)
Exhaust Spark Arrester Muffl er
Air Filtration Dry Element with pre-fi lter
Air Speed 191 mph / 85.4 m/sec
Air Volume 730 cfm / 18.7 m 3 /min
Idle Speed 2,000 RPM
W.O.T. Speed w/std. nozzle 7,500 RPM
Sound Level 76 dB(A) @ W.O.T and 50 feet per ANSI B175.2
Specifi cations are subject to change without notice.
An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en-
gine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine
emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM/TWC (Engine Modifi cation and 3-way Catalyst) and for the
fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission
may be applicable to California models only.