Sony XC-555 - Manual (Page 9)

9
Overview
Connections
An example of the assembly of the DC700/DC700CE
Camera Adaptor.
Genlock
The color video camera module is designed so that
internal sync and external sync are switched
automatically. When the color video camera module
receives the following external sync signal, the camera
is synchronized to that external sync signal.
Input signal
HD/VD, VS
Output signal
DC-700
Notes
• Make sure to turn off the power to the units you are
connecting or their components may be damaged.
• When disconnecting the cord, pull it out by the plug.
Never pull the cord itself.
• Connect the power cord after completing all other
connections.
WEN
TRIG
HD
VD/SYNC
AC IN
1
1
2
2
CAMERA VIDEO
Color video camera module
to DC/IN/SYNC/VIDEO connector
CCXC-12P02N/12P05N/
12P10N/12P25N
VBS out
Y/C out
The Signal is horizontally synchronized with
an HD signal externally input and is vertically
synchronized with an VD signal externally
input.
The burst signal is not externally
synchronized.
Same as above
Notes
• Use a synchronous signal specified by this Technical
Manual. For details on the specifications, see page
25.
• You cannot input a VBS signal to the camera as a
synchronous signal.