Salter Housewares AW1000 - Manual (Page 12)

12
PERFECT TEMP
? Follow the disassembly steps outlined above.
? Use the soft, storage bag by placing the folded top of the unit onto the base and
inserting into the bag, handle side in. Place the base of the unit in the other
compartment so that the door handle rests inward on top of the base in the bag.
Place cords in bag for easy retrieval.
? Place the bag in your cabinet, cupboard or pantry in a dry area. Do not allow the
unit to be stored in a damp pantry or on a surface that may become wet or damp.
? Store your Perfect Temp in the cabinet in the flat position to prevent damage from
the unit tipping over.
TROUBLESHOOTING
The Perfect Temp will not operate.
? Has a household fuse blown, or has a circuit breaker tripped?
? Is the power supply cord properly seated in the unit and the outlet?
? Has the cord been damaged in some way? If so, DO NOT USE THE PERFECT
TEMP. Contact Customer Service for replacement information.
? Has the 3 hour auto-shut off feature activated?
The Perfect Temp will not heat properly.
? Is the unit securely positioned in the grooves on the base? If not, turn off the
unit, allow the unit to cool and reposition the top of the unit into the grooves on
the base.
? Has the Perfect Temp been overloaded? The weight inside the unit should not
exceed 30 pounds.
There is excessive moisture in the Perfect Temp.
? Is the slide properly positioned to the MOIST or CRISP setting?
? Did you preheat the Perfect Temp before using?
The door will not slide into the unit when opened.
? Is there food or a container blocking the ability of the door to slide in?
Warming results are not what I expected.
? Is the correct temperature setting in use?
? Is the vent set to MOIST or CRISP properly?
STORAGE