Snapper M26 Series User Manual
Page 10
10
51-3845, 7/04
SAFETY SIGNS AND LABELS
Care of Safety Signs
1.
Keep safety signs clean and free from obstructing
material.
2.
Clean safety signs with soap and water; dry with a
soft cloth.
3.
Replace damaged or missing safety signs with new
signs from SWEEPSTER.
4.
If a component with safety sign(s) affixed is re-
placed with a new part, make sure the new safety
sign(s) is (are) attached in the same location(s) as
the replaced components.
5.
Install new safety signs on clean surfaces only.
Spray a weak solution of soap and water on the
surface before applying the safety sign. This will
allow repositioning of the label. Squeegee any
bubbles to the outside edge.
__________________________________________
Item
Part
Description
1.
50-0103
Label, Caution, To Avoid Injury
2.
50-0104
Label, Danger, Lock-Collar, Unlock-Collar
3.
50-0115
Label, Danger, Rotating Drive
4.
50-0145
Label, Warning, Rotating Broom
5.
50-0394
Label, Danger, Rotating Drive Line
6.
50-0076-1
Label, Caution, Pinch Point
7.
50-0213
Label, Warning, Rotating Driveline
Locations
SAFETY SECTION