User instructions – Smeg ST1124S-1 User Manual

Page 4

Advertising
background image

User instructions



8

3 IN 1 OPTION BUTTON

Press this button to activate the option for use of 3 IN 1 products.

9

3 IN 1 OPTION LIGHT

Illuminates to indicate that the function is activated.

10

HALF LOAD BUTTON (on some models only)

Press this button to activate the half load wash option.

11

HALF LOAD LIGHT (on some models only)

One of the two buttons illuminates to indicate that the half load wash
option in the top or bottom basket has been selected.

12

PROGRAM DELAY BUTTON (on some models only)

Press this button to delay the start of the program by up to 9 hours.

13 INFORMATION DISPLAY (on some models only)

SETTING THE WASHING PROGRAM AND SWITCHING ON
To select the most suitable program for the dishes to be washed refer to
the table below, which indicates the most appropriate program according
to dish type and degree of soiling.

After using the table to identify the most appropriate washing program:
• press

the

ON/OFF button (1) and wait for the PROGRAM

INDICATOR LIGHT (2) to illuminate;

• keep

pressing

the

PROGRAM SELECTION button (3) until the

indicator light corresponding to the desired program illuminates;

• close the door; after about 2" the program will start. While it is in

progress, the relative LIGHT will flash (indicating that the program is
being executed).

Advertising
This manual is related to the following products: