Smeg ST1124S-1 - Manual (Page 6)

User instructions

The washing cycle will not take place if the dishwasher door is left open or
not properly closed.
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program ECO
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting 5/6
CANCELLING THE CURRENT PROGRAM
• To cancel the currently selected program, open the door and hold
down the PROGRAM SELECTION (3) button for a few seconds
until the indicator lights for programs 4 and 5 illuminate
simultaneously (the word "end" is displayed on the window).
• Close the door.
• After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
1.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.