Samsung HT-TX715 - Manual (Page 17)

1
ENG
●
CONNECTIONS
Speaker Components
Front/rear Tallboy Stand (HT-TX715 only)
SPEAKER STAND BASE STAND SCREW (Small) :
16EA
SCREW (Large) :
4EA
Turn the STAND upside-down and connect it to the STAND BASE.
Turning the SCrEW (Small) clockwise, connect it to four holes marked with the
arrow using a screwdriver as shown in the illustration.
Connect the assembled stand to the SPEAKEr.
Turning the SCrEW (Large) clockwise, connect to a hole on the
screwdriver as shown in the illustration.
This is the successfully assembled speaker.
1.
.
.
4.
.
1


How to Install the Speaker on the Stand
STAND
BASE
STAND
SPEAKER
STAND
4

Make sure that the TALLBOY type speaker should be installed on the fl at and stable area. Otherwise it may
fall down due to external shock.
M
`
HT-X715_ELS_ENG_0421.indd 17 2008-04-23 �� 3:26:17