Samsung HT-TX715 - Manual (Page 29)


ENG
●
PLAYBACK
playback
DISC PLAYBACK
B
Load a disc vertically into the Disc Insert Hole.
Place a disc gently into the tray with the disc’s label facing
up.
Close the compartment by pressing the PLAY ( ) button.
Playback starts automatically.
To stop playback, press the STOP (@) button during playback.
If pressed once, PrESS PLAY is displayed and the stop position will be stored in memory.
If the PLAY ( ) button or ENTEr button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, STOP is displayed, and if the PLAY ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the PAUSE ( ) button during playback.
To resume playback, press the PLAY ( ) button again.
You can use the product in either vertical or horizontal position. If you select to use it either vertically or
horizontally, The operation (Previous / Next) of the [ or ] button will be automatically adjusted to the
applicable position.
Depending on the content of the disc, the initial screen may appear different.
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System :
a copy protection system) recommendations.
1.
~
.
~
~
~
~
M
`
`
`
HT-X715_ELS_ENG_0421.indd 29 2008-04-23 �� 3:26:37