Schumacher DieHard 00-99-000867-0109 - Manual (Page 7)

• 5 •
12v DC Electrical Device Example Run-Time Chart 6.2
Appliance Type Estimated Power Estimated
Time*
Fluorescent Lights, Cellular phones 4 Watts 50 Hours
Radios, Depth Finders, Fans 9 Watts 25 Hours
Camcorders, DvD players, Spotlights 15 Watts 13 Hours
Electrical tools, bilge pumps 24 Watts 7.3 Hours
Electric Coolers 48 Watts 4.5 Hours
air Compressors, Car vacuums 80 Watts 2 Hour
*NOTE: Estimated run-times. actual time may vary. times are based on
the internal battery being new, fully charged and operating at room tem-
perature.
SPECIFICATIONS 7.
Internal battery type DieHard maintenance-Free agm Lead
acid
nominal voltage 12v DC
Capacity 22ah
DC power Outlet (max. Continuous
Load)
15a
jumper Cables 4-gauge 50 Inches Long
battery Clamps Replaceable jaw
Dimensions (H x W x D) 16” x 14” x 5”
Weight 22 lbs.
TO ORDER AND REPLACE JAWS 8.
Part Number: 2299001580
Description: Kit, battery Clamp Rebuild
QTY Per Clamp: 1
battery Clamp jaw Replacement
8.1
Secure the clamp in an open position using a vise or equivalent clamping •
device. IMPORTANT: make sure the rotary switch on the front panel is in
the O (OFF) position and the jump starter is not plugged into a 120v aC
electrical wall outlet.
Unscrew the fastener securing the cables to the rear of the top jaw.
•
Unscrew the fasteners (2) securing the Copper jaws to the plastic clamp. •
Remove the jaws and braided cable.
Reverse for assembly.
•