SRS Labs CSD-07D - Manual (Page 11)

discrete by removing the consumer system
compensation adjustments. This also closely
emulates PLII without any of the dimension,
panorama and spread settings enabled.
• LCRS – LCRS LED Solid:
Press the Lt/Rt Mode button
until it cycles to LCRS.
Emulates the performance of older four channel
surround receivers.
7. Output Signal Presence: Displays signal presence and clip on corresponding
output channels. When the LEDs glow green on the
front panel, the corresponding channel is outputting a
signal > -44 dBFS at the input. If the LED is not
illuminated, a signal > -44 dBFS is not present. The
clip indicator LEDs will turn red at 0 dBFS.
Note that if the signal indicator is not illuminated, it may simply indicate a transitory
period where no content is present in the source mix.
10