Samsung HL-P5067W - Manual (Page 4)

Connecting CableCARD
1
2
Insert the CableCARD into the
“CableCARD” slot and the message
“CableCARD Inserted” is displayed on
the screen. If the channel information
does not already exist, the message
“Updating Channel List” is displayed
during channel information configura-
tion.
The pairing information containing a
telephone number, CableCARD ID,
Host ID and other information will be
displayed in about 2~3 minutes. If an
error message is displayed, please
contact your Service Provider.
3
When channel information configu-
ration is finished, the message
“Updating Completed” is displayed.
It indicates that the channel list is
now updated.
Connecting an Analog Cable Converter Box and a VCR
This connection allows you to watch and
record basic and premium cable channels,
as well as watch videotapes. You should
keep your TV selected to “Cable IN” so that
you can use the TV’s features. When view-
ing premium channels or recording with the
VCR, select “Air IN” (whichever channel is
vacant in your area), then use the converter
box to change channels.
Caution: If you want to record one channel
while watching another channel, a splitter
(not included) must be added between the
cable and “Cable IN”. One output of the
splitter goes to “Cable OUT” and the sec-
ond output is connected to IN on the cable
converter box.
If you have a mono VCR, connect L/Mono
to VCR Audio OUT using only one audio
cable.
If you have an S-VHS VCR, use the S-Video
connections and remove the video cable. Do not connect the video cable and the S-Video
cable to video1 simultaneously.
When you use a converter box with your TV there may be features that you can not program
using the remote control, such as programming your favorite channels and blocking chan-
nels.
You must obtain a CableCARD from a local cable service provider.
Incoming
Cable or
Antenna
From
Cable
TV Rear Panel
Stereo VCR
TV Rear Panel
Please insert the
card as shown.
4
BP68-00429A-00Eng 11/10/04 3:18 PM Page 4