Sony DVP-NS601H - Manual (Page 44)

44 US
Notes
• While playing a Super VCD on which the audio
track 2 is not recorded, no sound will come out
when you select “2:STEREO,” “2:1/L,” or
“2:2/R.”
• When playing in DVD-VR mode: If you connect
to an audio component using the DIGITAL OUT
(COAXIAL or OPTICAL)/HDMI OUT jack and
want to switch between the sound tracks, set
“DOLBY DIGITAL” to “D-PCM” in “AUDIO
SETUP” (page 59).
• If “MODE (MP3, JPEG)” is set to “AUTO” or
“AUTO (BGM)” (page 50), you can hear the
player’s internal background sound when MP3 is
not played.
Checking the audio signal
format
You can check the audio signal format by
pressing AUDIO repeatedly during playback.
The format of the current audio signal (Dolby
Digital, DTS, PCM, etc.) appears as shown
below.
Example:
Dolby Digital 5.1 ch
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound’s
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Note
If “DTS” is set to “OFF” in “AUDIO SETUP”
(page 59), the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks.
1:ENGLISH DOLBY DIGITAL 3 / 2 .1
Rear (L/R)
Front (L/R)
+ Center LFE (Low Frequency
Effect)