Schneider Electric POWERLOGIC PWRSRV750 - Manual (Page 26)

Chapter 5—Setup 63230-216-207/A3
Connecting to the Power Server with NetMeeting 9/2002
© 2002 Schneider Electric All Rights Reserved 22
3. Call the Power Server. Enter the IP address in NetMeeting and click the
“Place a Call” button.
Use IP address 1 that you entered in nwsetup on page 19.
The Remote Desktop Sharing dialog displays.
4. For User, enter: PowerServerAdmin
For Password (case-sensitive), enter: Pwr_Srv
Leave domain blank and click OK.
You are now controlling the Power Server desktop and are ready to
configure the POWERLOGIC system as described in the next section,
“Configuring the Power Server” on page 23.
NOTE: We recommend that you change your password after completing
setup. See Appendix B—Changing Your Password on page 31 for
instructions.
3070
3018