Schneider Electric POWERLOGIC PWRSRV750 - Manual (Page 51)

63230-216-207/A3 Appendix F—Connecting Third Party Devices to the Power Server
9/2002
47 © 2002 Schneider Electric All Rights Reserved
APPENDIX F—CONNECTING THIRD PARTY DEVICES TO THE POWER SERVER
You can connect third party devices to the Power Server using a custom
install application. Contact your field sales representative to determine the
availability of the custom install application for a particular device.
If you have retained the custom files, follow these steps to install the files and
connect to the device.
1. Start NetMeeting.
Refer to“Starting NetMeeting” on page 21 and connect to the Power
Server.
2. In the Target’s desktop window, press Ctrl-W to display the Power Server
desktop.
3. Display NetMeeting again by clicking the NetMeeting icon on your PC’s
taskbar.
4. Click OK to close the Meeting Properties window.