Product description, Installation and operation, Safety precautions – Schneider Electric POWERLOGIC PWRSRV750 User Manual
Page 57: Connecting to the power server, Danger
63230-216-207/A3
Appendix G—POWERLOGIC System Display (SD700) Installation
9/2002
Product Description
53
© 2002 Schneider Electric All Rights Reserved
APPENDIX G—POWERLOGIC SYSTEM DISPLAY (SD700) INSTALLATION
PRODUCT DESCRIPTION
The System Display is a full-color, panel-mount touch screen display
designed to be mounted on power equipment. The system display lets you
view the Power Server screens locally at the equipment. Water and dust
protection to NEMA 4 and 12 standards allow the system display to be used
in a wide variety of industrial and commercial applications. A bright LCD
display with 800 X 600 pixel resolution and a wide viewing angle ensure that
data is visible in a broad range of lighting conditions. For complete
specifications, see the user’s guide shipped with the display.
INSTALLATION AND OPERATION
Refer to the user’s guide shipped with the display for information on:
• Installing the display
• Connecting control power
• Auto-adjusting the touchscreen
• Understanding the front panel LED indicators
SAFETY PRECAUTIONS
CONNECTING TO THE POWER SERVER
To connect the touch screen display to the Power Server, do the following:
1. Turn off all power supplying the electrical equipment in which the display
and power server are installed, and confirm that power is off using a
properly rated voltage sensing device.
2. Locate the serial cable supplied with the system display. The serial cable
has a male nine-pin connector on one end and a female nine-pin
connector on the other end.
DANGER
HAZARD OF ELECTRIC SHOCK, BURN, OR EXPLOSION
• This equipment must be installed and serviced only by qualified
personnel.
• Turn off all power supplying this equipment and the equipment it is
mounted in before working on or inside equipment.
• Always use a properly rated voltage sensing device to confirm that power
is off.
• Replace all device doors and covers before turning on power to this
equipment.
Failure to observe these instructions will result in death or serious
injury.