SUPER MICRO Computer 5010E - Manual (Page 106)

S UPERSERVER 5010H/5010E User's Manual
7-34
BIOS
7-8 Boot Setup
Choose Boot Setup from the AMIBIOS Setup main menu. All Boot Setup
options are described in this section. The Boot Setup screen is shown
below.
Boot Device Priority
1st Boot Device
AMI BIOS automatically detects hardware devices of the system. This op-
tion allows the BIOS to specify the order of boot sequence that is auto -
d e t e c t e d b y t h e B I O S . T h e s e t t i n g s f o r t h e 1 s t B o o t D e v i c e a r e
Removeable Device, Hard Drive, ATAPI CDROM, Onboard LAN1 option,
and Onboard LAN2 option.
SMBUS Resume
This allows you to wake up the system from a System Management Bus
device. The settings for this option Disabled and Enabled.
BIOS SETUP UTILITY
Main Advanced Chipset PCIPnP Power Boot Security Exit
> Boot Device Priority
> Hard Disk Drives
> Removable Devices
> ATAPI CDROM Drives
↔
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.
LAN Wake-Up
This allows you to wake up LAN1 and LAN2 from a System Management
Bus device. The settings for this option Disabled and Enabled.