SUPER MICRO Computer 5010E - Manual (Page 66)

6-4
S UPER S ERVER 5010H/5010E Manual
Figure 6-3. System Cooling Fans
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
SCSI Drives: You do not need to access the inside of the chassis to
replace or swap SCSI drives. Proceed to the next step for instructions.
Note: You must use standard 1" high, 80-pin SCA SCSI drives in
the SuperServer 5010H.
CD-ROM/Floppy Disk Drive: For installing/removing the CD-ROM or floppy
disk drive, you will need to gain access to the inside of the 5010H/5010E
by removing the top cover of the chassis. Proceed to the "CD-ROM and
Floppy Drive Installation" section later in this chapter for instructions.
Note: Only a "slim" CD-ROM drive will fit in the 5010H/5010E.
Blower Fan
Chassis Cross Section
Fan Mounting Posts
Optional Fan
Location