Samsung SCQ-041AP - Manual (Page 20)

User’s Guide
8
Chapter 2, SCQ-041P Installation
Configuration for Installation
This chapter describes the configuration required for the safe
installation and usage of the SCQ-041P.
You can install the SCQ-041P on flat table or rack. This system must be
in horizontal balance and should not be placed on a vertical or slide
setting. The location of the main board and the configuration of the wire
unit component are very important to operate the system properly. If
the components are so close that ventilation is not sufficient, the system
may not work properly or will be difficult to maintain. To reduce risk
leading to system malfunction or shutdown as a result of configuration,
please make sure to allow enough ventilation in the system operating
room and fix the cover of main unit firmly. High-voltage current occurs
in the unit; therefore, please do not try to open the cover.
The SCQ-041P requires the following operating conditions to maintain
temperature and humidity.
• Operating temperature : 32 - 86°F (0 - 40°C)
• Relative humidity : 30% - 90% relative humidity
• Input voltage : AC 100V-240V
• Power of consumption : 10 Watts
• Frequency : 50 Hz/60 Hz
CAUTION
Please supply input power voltage with a variation of less than 10% of the
specific voltage to the system in use. The power plug must be grounded.
Please do not connect other appliances or equipment using the system’s
power outlet. It is recommended to use AVR to supply a stable power source.
If you would use this appliance to supply voltage for 240V, you should be
used the proper plug adapter for 240V rating.