Samsung SCQ-041AP - Manual (Page 28)

User’s Guide
16
Chapter 4, Configuring the SCQ-041P
In accordance with the above procedure, you can proceed to configure
system operation once you finish connecting the other components to
the SCQ-041P. To proceed with system configuration, you must access
the system setup mode to use the setup menu. The system setup
procedure is as follows.
1. Check all power connections to the SCQ-041P and power the system
on.
2. Press the “SETUP” button and the green light over the LED on the
button come on. Now you can see the system setup main menu on
the quarter section screen as illustrated below.
If you press the “MENU” button located on the front of the system, you
can move the “ Ǟ” mark. If you press the “SETUP” button, the main
menu disappears and the LED light simultaneously goes off. You can
then return to the previous mode from the setup mode.
3. Now you can configure each feature in the main menu.
<MAIN MENU>
→
1. CHANNEL TITLE SET
2. DATE/TIME SET
3. DISPLAY MODE SET
4. ALARM SET
5. AUTO SWITCHER SET
6. LOSS DETECT SET