Samsung sv 255B - Manual (Page 21)

GB
37
GB
36
You can set repeat play to repeat the tape continuously from
beginning to end.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result:
The EASY OPERATION menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the
REPEAT PLAY option is selected.
5 To... Press ➛ or ❿ , until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
You can set interval repeat play to repeat the cassette several times
for special interval.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding ➐ , ❷ or ➛ , ❿ buttons to select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result:
The EASY OPERATION menu is displayed.
4 Press the corresponding ➐ or ❷ buttons, until the
NO. OF INTERVAL REPEAT option is selected.
5 To... Press ❿ , until...
Interval repeat play 5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval repeat play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
7 To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result:
“ INTERVAL REPEAT SETTING ” is displayed.
Press the INPUT/REPEAT button one more time at the desired
end point.
Result:
The tape is automatically rewound to the start point.
“
INTERVAL REPEAT ” is displayed.
Interval Repeat Play
Auto Repeat Play
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
➐❷ ❿ END: MENU
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
➐❷ ❿ END: MENU
BONUS
Using the Tape Counter
0:00:00
CLR/RST F.ADV INDEX
TV VCR INPUT
REPEAT
VOL PROG/TRK
AUDIO
REC MENU
DISP./
SELECT
-/--
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
TRK PROG
UDIO
REC MENU
DISPLAY
2
2
2
2
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the VCR
◆ Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a sequence:
◆ Press DISP./ or DISPLAY twice to display the counter
◆ Press CLR/RST when you want to set the tape counter to
zero
3 When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-froward or rewind to the sequence at which the
counter was set to zero, press
➛➛ or ❿❿ .
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
★ (SV-250B/SV-250X)
★ (SV-655B/SV-650B/
★ ( SV-450B/SV-255B/
★ ( SV-655X/SV-450X/ ★ ( SV-650X)