Sony CDX-C7850R - Manual (Page 28)

28
Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P” above.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) to enter the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
To continue inserting tracks, repeat steps 2
through 4.
Note
When a 24 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert
more tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Track slot number
Erasing tracks in a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P” above.
2
Press (2) (N) or (5) (n) to select the
track you want to erase.
The track currently registered in slot 6.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6
Press (SHIFT).
µ
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
DISC TRACK
Track slot number
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
DISC TRACK