Sony NHS-2000 - Manual (Page 25)

Using the IR Remote Commander
®
Unit
23
If you want to... Pick up the IR Remote Commander ® unit and. . .
Operate a remote room television. 1. To turn a Sony television in the room on and off, press the
TV POWER button.
2. To change channels on a Sony television in the room, press the
TV CHANNEL +/- buttons.
3. Press the NUMERAL buttons to select a TV channel number.
4. Press the ENTER button to enter the numbers you've pressed on
the numeric keypad.
5. Use the TV VOLUME +/- buttons to adjust the volume of a Sony
television in the room. Recommended only for watching TV channels.
Does not affect the volume of audio from the main system.
6. Use the DISPLAY button to see TV monitor display messages.
7. Push the CURSOR/ENTER control in the desired direction to
navigate on-screen menus. Press down on the control to enter your
selections.
8. Press the RETURN/EXIT button to return to the previous menu on
your television screen.
9. Use the TV/VIDEO button to switch between TV and VIDEO inputs
on a Sony television.
Choose an AM/FM station. 1. The system's A/V receiver enables you to browse AM/FM preset
stations by name. (The name display operates when preset by your
installer. See A/V receiver owner's manual for additional information.)
2. The PRESET CHANNEL screen appears for a few seconds after
you initially select the Tuner source. If the PRESET CHANNEL
screen does not appear in the Display Window, press the PAGE key
until the PRESET CHANNEL screen appears.
3. To scroll through the station list, push the SCROLL UP/DOWN
buttons.
4. To select a disc, push the SELECT button that appears to the left of
the disc name.
Turn the Remote Room off. 1. Press the POWER button.
2. If you've been watching a video source, turn off the room television.