Sirius Satellite Radio SiriusConnect SBTV091807a User Manual
Page 22
[
Audio Mode Operation
]
40
[
Audio Mode Operation
]
41
the DCU. The TV channel can be then changed by using the + and – buttons, or the
Channel Up/Down buttons on the audio remote control.
To switch the DCU back into the audio mode for SIRIUS radio, press the A/V button.
Display Button (Disp)
Pressing the DISPLAY (diSP) button from the Default display screen toggles the top
line of the display between the channel name and time, and the category and date.
(Figure 2)
CH NAME
Artist Name
Song Title
12:00
A
001
Category
Artist Name
Song Title
Date
A
001
CH NAME
Program Title
Episode/Rating
12:00
V
001
Category
Program Title
Episode/Rating
Date
V
001
Audio Mode
Video Mode
Note- Episode and Rating will only display when available
Pressing and holding the DISPLAY (diSP) button for 1½ seconds while in the audio
mode will enter Channel List mode which is described in the next section.
searCh moDes (Category, Channel, artist, song title)
There are several ways to search for and select music: by channel, by category, by art-
ist, and by song title.
If you want to find a different channel to listen to, press and hold
the DISPLAY (diSP) button to enter Channel List mode:
Use the < and > buttons to scroll through the categories. Use the + and – but-
tons to scroll through the available channels in each category.
Pressing the DISPLAY (diSP) button
while in the Channel List mode will switch
1.
2.
figure 2
figure 2
Power Button Operation
Result
Press and hold for 2 sec-
onds when SCV1 is On
Turns the SCV1 Off
Press and release when
the SCV1 is On
Places the SCV1 in Standby.
If placed in Standby while in Audio mode: Mutes the
front audio output from Sirius Satellite Radio, dims the
screen, and displays AUDIO STANDBY MODE. The
FM output is also turned off.
If placed in Standby while in Video mode: Mutes the
front audio output from Sirius Backseat TV, dims the
screen, and displays VIDEO STANDBY MODE. The
FM output is also turned off.
Press and release when
the SCV1 is in Standby
Exits Standby and resumes the last mode (i.e., audio
or video mode) before it was placed in Standby
The SCV1 will remember what state it was in when the vehicle was turned off and will
resume that state (i.e., On, Off, Audio Standby, or Video Standby) the next time the
vehicle is turned on.
Changing ChannelS
Pressing the + button will increase or move up to the next channel. Pressing the – but-
ton will decrease or move to the previous channel.
sWitChing BetWeen auDio anD ViDeo moDes
You can switch the DCU between the Sirius Satellite Radio service and the Sirius
Backseat TV service by pressing the A/V button on the DCU, or the menu button on
the audio remote control.
When the DCU is in the video mode, the audio will switch from SIRIUS radio to the
Backseat TV, and the TV channel information and programming will be displayed on