Sirius Satellite Radio SiriusConnect SBTV091807a - Manual (Page 24)

[
Audio Mode Operation
] 44 [
Audio Mode Operation
] 45
Select the channel you want to preset by pressing the + or – button to move up
or down through the channels.
When the channel is selected, hold the numbered preset button in which you
want the channel stored for at least 1½ seconds. You will hear a beep and the
preset bank number will indicate the memory location to which the channel has
been stored. If the preset button already has a channel stored in it, the stored
channel will be replaced by the new channel.
In video mode, there is only one preset bank V. The first three presets in this bank are
set to the three TV channels.
reCalling Channel presets
The 6 presets in the active bank (A through E) can be selected by pressing the 1
through 6 buttons on the DCU, or the remote control.
Press the bAnd button to activate the preset bank you want. The selected bank
is shown in the top right corner of the Default display screen. (Figure 5)
Press the desired preset button (1 – 6) on the DCU or the remote to recall the
preset. The channel will change and the display will revert to the Default display
screen for the new channel.
When in video mode, the first three presets, 1, 2, and 3 are already pre-programmed
to the three TV channels. Presets 4, 5, and 6 are inoperative.
searChing For a Channel preset (p.tune moDe) (AUdIO MOde Only)
It is possible to quickly search through all of your presets using the + or – button.
Press and hold the bAnd button to enter the Preset Tune Mode (P.TUNE).
Preset Tune Mode will momentarily be displayed and the top corners of the
display will invert to indicate Preset Tune Mode. (Figure 5)
Use the + or – button to move up or down through your presets. Only channels
stored in your presets will be displayed, regardless of which bank they are stored
in. Presets will be grouped and displayed by preset bank and number (ex. A-1,
A-2...B-1, B-2) and rotate back to the beginning.
2.
3.
1.
2.
1.
2.
3.
CH NAME
Artist Name
Song Title
12:00 A 001 CH NAME
Artist Name
Song Title
12:00 A 001
To exit the Preset Tune Mode and return to Default display screen, press and hold the
bAnd button.
preset tune moDe (AUdIO MOde Only)
In the Preset Tune Mode, you can view your list of presets showing Channel Name,
Artist Name, or Song Title just like in the Channel List mode:
Press and hold the bAnd button to enter the Preset Tune Mode (P.TUNE).
(Figure 6)
Press the DISPLAY (diSP) button for 1½ seconds which will enter the Preset
Tune Mode displaying up to 3 preset channel names. Pressing the DISPLAY
(diSP) button while in this mode will change between the Channel Name, Artist
Name, or Song Title list modes. The name field will scroll only if the length of the
Artist Name or Song Title cannot be viewed in its entirety.
Use the + or – button to highlight the desired preset.
Push the SeleCT button to select the channel. The channel will change and the
display will revert to the P.TUNE display. 1.
2.
3.
4.
figure 5 figure 5
P Tune display P Tune display default display default display