User instructions, Description of the controls – Smeg ST93P User Manual
Page 10
11
1. Description of the controls
1.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
1
ON/OFF BUTTON
Pressing this button energises the appliance.
2
SELECTED PROGRAM INDICATOR LIGHTS
Illumination of this light denotes the program selected and the occurrence of a
fault (troubleshooting).
3
PROGRAM SELECTION BUTTON
By pressing this button in sequence it is possible to select the desired program.
4
5
RINSE AID WARNING LIGHT
Illumination of this light signals that rinse aid dispenser is empty.
6
EXTRA PROGRAM BUTTON
This button gives access to the one of the five extra programs (see table).
EXTRA PROGRAM LIGHT
Illuminates to indicate that one of the five extra programs (see table) is going
to be executed.
7
HALF LOAD BUTTON
Press this button to activate the half load wash option.
8
HALF LOAD LIGHT
Illumination of the light indicates selection of the HALF-LOAD function.
9
PROGRAM DELAY BUTTON
Press this button to delay the start of the program by up to 9 hours.
10 INFORMATION DISPLAY
end
2
3
4
8
7
6
5
10
9
1
User instructions