Smeg ST93P - Manual (Page 16)

User instructions
17
SELECTING HALF LOAD WASH
This function is ideal for small loads and saves water and electricity. It is
controlled by the HALF LOAD (7) button:
1) press the button once to select washing in the top basket (the
relative light comes on);
2) press the button a second time to return to the normal full load
washing mode (washing in both baskets, light off).
When washing in the bottom basket only, the cutlery basket can be
divided so that only half is used.
EXTRA PROGRAMS
Button (5) gives access to five extra programs in addition to the ones
which can be selected directly using the program selector button.
This button must be pressed (the light comes on) after selection of the
"main" program (1, 2, 3, 4 or 5).
This function is retained in the memory, so the button has to be
pressed again (the light goes out) if the user wishes to execute one of
the 5 main programs at the next cycle.
end
2 3 4 8 7 6 5 10 9 1