Samsung CLP-320 - Manual (Page 31)

Getting started_ 31
window will appear.
• Check if you want to install the software without connection
of the printer.
- Check this option to install this program without a machine
connected. In this case, the print a test page window will be
skipped, and completes the installation.
• Search again
When you press this button, the firewall notice window
appears.
- Turn off the firewall and Search again. For Window operating
system, click Start > Control Panel > Windows Firewall,
and inactivate this option. For other operating system, refer
to its on-line guide.
- Turn off the firewall from the third party's program beside the
operating system. Refer to the manual provided by
individual programs.
• Direct Input
The Direct Input allows you to search a specific machine on
the network.
- Search by IP address : Enter the IP address or the host
name. Then click Next.
To verify your machine’s IP address, print a network
configuration report (See "Printing a machine report" on
page 72).
- Search by network path : To find a shared machine (UNC
Path), enter the shared name manually or find a shared
printer by clicking the Browse button. Then click Next.
• Help
If your machine is not connected to the computer or network,
This help button gives you the detailed information about how
to connect the machine.
5. The searched machines will be shown on the screen. Select the one you
wish to use and click Next.
If the driver searched only one machine, the confirmation window
appears.
6. After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and skip to step 8.
7. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8. If you want to register your machine on Samsung website, click On-line
Registration
.
If your machine is not connected yet to the computer, click How to
connect?
. How to connect? gives detailed information about
how to connect the machine. Follow the instructions in the window.
9. Click Finish.
If the printer driver does not work properly, follow the steps below to
repair or reinstall the driver.
a) Make sure that the machine is connected to your machine and
powered on.
b) From the Start menu, select Programs or All Programs >
Samsung Printers > your printer driver name > Maintenance.
c) Select the option you wish to execute, then follow the instruction on
the window.
Macintosh
The software CD that came with your machine provides you with the Driver
files that allow you to use the CUPS driver or PostScript driver (only
available when you use a machine, which supports the PostScript driver) for
printing on a Macintosh computer.
1.
Make sure that the machine is connected to your computer and powered
on.
2. Insert the supplied software CD into your CD-ROM drive.
3. Double-click the CD-ROM icon that appears on your Macintosh desktop.
4. Double-click the MAC_Installer folder.
5. Double-click the Installer OS X icon.
6. Enter the password and click OK.
7. The Samsung Installer window opens. Click Continue.
8. Read the license agreement and click Continue.
9. Click Agree to agree to the license agreement.
10. Select Easy Install and click Install. Easy Install is recommended for
most users. All components necessary for machine operations will be
installed.
If you select Custom Install, you can choose individual components to
install.
11. When the message which warns that all applications will close on your
computer appears, click Continue.
12. Select the installation type you want and click OK.
• Typical installation for a local printer: Installs default components
for a device that is directly connected to user’s computer.
• Typical installation for a network printer: Installs software for a
device that is on the network. The SetIP program automatically runs.
If the machine has already configured network information, close the
SetIP program. Go to the next step.
• Wireless Setting and Installation : For CLP-325W(K)/CLP-326W,
you can access Wireless Setting and Installation menu. The
Wireless Setting and Installation
allows you to install a wireless
network to connect to the machine with USB cable (See "Setting a
wireless network with USB cable" on page 41).
13. Follow the instructions on the screen to complete the installation. After
the installation is finished, click Quit or Restart.
14. Open the Applications folder > Utilities > Print Setup Utility.
• For Mac OS X 10.5 ~ 10.6, open the Applications folder > System
Preferences and click Print & Fax.
15. Click Add on the Printer List.
• For Mac OS X 10.5 ~ 10.6, click the “+” icon; a display window will
pop-up.
16. For Mac OS X 10.3, select the USB tab.
• For Mac OS X10.4, click Default Browser and find the USB