Schumacher E-CHARGE VTV-20 User Manual

Page 2

Advertising
background image

2

5. If the vehicle still does not start, repeat step 4. The VTV-20

will continue charging the battery for up to an hour.

6. If your vehicle does not start after an hour of charging, there

may be other problems with the engine and/or starting sys-

tem. It is also possible that the battery is incapable of taking

a charge and needs to be replaced.

NOTE: It is normal for the status light to blink rapidly and/or

to hear a clicking noise while charging.

7. If your vehicle does start, and if your battery was in severely

discharged state, you will want to completely charge your bat-

tery with a standard battery charger as soon as possible.

8. If the Working Vehicle’s Power LED light continually flashes

on and off, then the Working Vehicle’s battery may be too low

to use. Try connecting to a different vehicle before assuming

that the VTV-20 is dysfunctional.

Advertising
This manual is related to the following products: