SUPER MICRO Computer Super H8QM3-2 - Manual (Page 56)

4-10
H8QM3-2/H8QMi-2 User’s Manual
PCI IDE BusMaster
Set this value to allow or prevent the use of PCI IDE busmastering. Select "Enabled"
to allow AMI BIOS to use PCI busmaster for reading and writing to IDE drives. The
options are Disabled and Enabled.
Offboard PCI/ISA IDE Card
This option allows the user to assign a PCI slot number to an Off-board PCI/ISA
IDE card in order for it to function properly. The options are Auto, PCI Slot1, PCI
Slot2, PCI Slot3, PCI Slot4, PCI Slot5, and PCI Slot6.
IRQ3/IRQ4/IRQ5/IRQ7/IRQ9/IRQ10/IRQ11/IRQ14/IRQ15
This feature specifi es the availability of an IRQ to be used by a PCI/PnP device.
Select Reserved for the IRQ to be used by a Legacy ISA device. The options are
Available and Reserved.
DMA Channel0/Channel 1/Channel 3/Channel 5/Channel 6/Channel 7
Select Available to indicate that a specifi c DMA channel is available to be used by
a PCI/PnP device. Select Reserved if the DMA channel specifi ed is reserved for
a Legacy ISA device. The options are Available and Reserved.
Reserved Memory Size
You may set reserved memory with this setting. The options are Disabled, 16k,
32k and 64k.
Onboard SAS Controller
Use this setting to Enable or Disable the onboard SAS controller.
Super IO Confi guration
Serial Port1 Address
This option specifi es the base I/O port address and Interrupt Request address of
serial port 1. Select "Disabled" to prevent the serial port from accessing any system
resources. When this option is set to Disabled, the serial port physically becomes
unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its I/O port
address and IRQ 4 for the interrupt address. The options are Disabled, 3F8/IRQ4,
3E8/IRQ4 and 2E8/IRQ3.