Important safety instructions, Save these instructions, For household use only – Steamfast SF-140 User Manual
Page 4
IMPORTANT SAFETY INSTRUCTIONS
4
Top Innovations
10. If red Power Indicator Light does not illuminate when unit is plugged in and Foot-Controlled
On/Off Switch is pressed, unit is not operating normally. Immediately disconnect cord from
power supply, then refer to troubleshooting guide on Page 13 of this manual for assistance.
11. Turn unit off and unplug power cord before filling Boiler with water.
12. Do not use unit where aerosol-based products are being used, or where oxygen is being
administered.
13. Unit is only meant to be used with recommended SF-140 accessories. Using other types of
attachments may cause damage to unit or injury.
14. When filling Boiler, only water should be used in unit - other cleaning agents could damage unit
or cause injury. Distilled or de-mineralized water is highly recommended, in order to minimize
potential build-up of mineral deposits. Do not overfill unit.
15. Do not attempt to use unit without properly filling Boiler with water.
16. To reduce risk of contact with hot water emitting from Steam Nozzle, check appliance before
each use by positioning it away from body and turning it on. Do not operate unit if Steam Nozzle
is blocked.
17. Burns can occur from touching hot metal parts, hot water, or steam. Do not touch bottom of Mop
Head or attempt to attach a Microfiber Cloth while unit is in use. Use caution when you turn unit
upside-down – there may be hot water in Boiler.
18. When steaming any surface for the first time, it is recommended that you consult the
manufacturer’s guidelines for material being steamed. For items in question, test on an
inconspicuous area before proceeding.
19. Steaming unsealed floor surfaces, or exposing a single spot of a sealed surface to continuous
steam, is not recommended. This may result in warping or damage to the surface.
20. Do not allow power cord to touch hot surfaces during use. Wrap cord loosely around Cord
Brackets when storing.
21. Always allow Steam Mop to cool completely (at least 30 minutes) and empty Boiler before
storing.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY