SoundCraft DAKOTA 328 - Manual (Page 12)

Dakota Setup Guide
11
The stereo output from the Dakota can be set to either AES/EBU or S/PDIF format. In this
configuration, this should be set to S/PDIF, so that the 328 correctly interprets the stereo data
incoming to the 328’s S/PDIF input.
In the Dakota Control Panel, select the ‘System’ tab. In the ‘Output Channel Status’ section,
select ‘Consumer (S/PDIF)’:
S/PDIF Output S/PDIF Output S/PDIF Output S/PDIF Output