Sega LTM170E6-L04 - Manual (Page 11)

3 www.seuservice.com
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION
This product is an indoor game machine. Do not install it outside. Even indoors, avoid
installing in places mentioned below so as not to cause a fire, electric shock, injury and
or malfunctioning.
● Places subject to rain or water leakage, or places subject to high humidity in the
proximity of an indoor swimming pool and or shower, etc.
● Places subject to direct sunlight, or places subject to high temperatures in the prox-
imity of heating units, etc.
● Places filled with inflammable gas or vicinity of highly inflammable/volatile chemi-
cals or hazardous matter.
● Dusty places.
● Sloped surfaces.
● Places subject to any type of violent impact.
● Vicinity of anti-disaster facilities such as fire exits and fire extinguishers.
● The operating (ambient) temperature range is from 5° to 30°.
● Be sure to check the Electrical Specifications.
Ensure that this product is compatible with the location's power supply, voltage and
frequency requirements.
A plate describing Electrical Specifications is attached to the product.
Non-compliance with the Electrical Specifications can cause a fire and electric
shock.
● This product requires the Breaker and Earth Mechanisms as part of the location fa-
cilities. Using them in a manner not independent can cause a fire and electric shock.
● Ensure that the indoor wiring for the power supply is rated at 15A or higher (AC
single phase 100 ~ 120V area), and 8A or higher (AC 220 ~ 240V area). Non-com-
pliance with the Electrical Specifications can cause a fire and electric shock.
● Be sure to independently use the power supply equipped with the Earth Leakage
Breaker. Using a power supply without the Earth Leakage Breaker can cause an out-
break of fire when earth leakage occurs.
● Putting many loads on one electrical outlet can cause generation of heat and a fire
resulting from overload.
● When using an extension cord, ensure that the cord is rated at ?A or higher (AC 100
~ 120V area) and ?A or higher (AC 220 ~ 240V area). Using a cord rated lower than
the specified rating can cause a fire and electric shock.
LIMITATIONS OF USAGE REQUIREMENTS
WARNING!
WARNING!