Sega LTM170E6-L04 - Manual (Page 42)

34 www.seuservice.com
9. COIN SELECTOR
Be sure to perform this operation with the power switched off. Failure to do so could
cause electrical shock or shorting.
● Use a soft cloth to clean the coin selector. When especially dirty, wipe it with a cloth
that has been dampened with either hot or cold water. Never use chemical cleansers
or solvents.
● When the coin selector has been removed, be sure to confirm that it works correctly
after replacing it.
● The coin selector is a piece of precision equipment. Careless handling can cause
breakage of components, poor connections in the electronic circuitry, etc.
9 - 1 REMOVING THE SELECTOR
Turn off the power.
Release and open the service door.
Flip the two spring loaded catches and remove the
selector up and out sideways from the bracket.
PHOTO 9.1 a
FIG. 9. 1
WARNING!
STOP
IMPORTANT!
1
2
3 Release
Catches