Siemens CX70 - Manual (Page 16)

©
Siem
ens AG
2003, \\D
ellse
rv
er\users\admin\Ul
ysses Refres
h\E2\S_
ULY
R_
Startup.fm
15 Security
VAR Langua
ge: en; V
A
R issue
date: 040604
right page (15) of Ulysses_Refresh SUG en2 short, A31008-H7103-M7-1-RC19 (30.11.2004, 12:26)
C
¢
T
¢
Security
¢
PIN codes
¢
Select function.
Change PIN2
(Display only if PIN 2 is available).
Proceed as with
Change PIN .
Chg.phonecode
(Change phone code)
You define the phone code (4–8 dig-
its) when you call up a phone-code
protected function for the first time
(e.g.
Direct call , p. 47). It is then valid
for all phone-code protected func-
tions.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is
denied. If this occurs, contact the
Siemens Service (p. 59).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instruc-
tions. If the PUK (MASTER PIN) has
been lost, please contact your serv-
ice provider.
Preventing accidental
activation
Even if PIN use is deactivated (p. 14)
confirmation is required to switch on
the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
B
Press down.
C
Press this key. The phone
switches on.
§Cancel§
Press this key or take no
action. The phone does
not switch on.
Connecting to Windows ®
PCs
You can connect your phone using
IrDA or a data cable (see Accessories)
to a Windows® PC. The Windows® PC
program MPM (Mobile Phone
Manager) enables you to backup
data on your Windows® PC and to
synchronise the Addressbook with
Outlook®, Lotus Notes™ and other
Siemens phones (as well as Gigaset).
You can download the Mobile Phone
Manager from the Internet at
www.siemens.com/cx70