Swisher FC-10 - Manual (Page 5)

Step 1: Attaching Front Cross Brace
Position the two Bottom Panels(#1) as shown in Figure 1 below.
Attach the Front Cross Brace(#2) to the Bottom Panels using 4 (#21)
Bolts, 4 (#23) Washers, and 4 (#24) Nuts.
Hardware Needed for Step 1:
1 (#2) Cross Brace
4 (#21) Bolts
4 (#23) Washers
4 (#24) Nuts
2 (#1) Bottom Panels
Step 2: Connecting Bottom Panels
Attach Bottom Panels(#1) as shown in Figure 2, using 2 (#21) Bolts,
2(#23) Washers, and 2 (#24) Nuts. SKIP the two middle bolt
connections until Step #5, when attaching the Wheel Axle Support.
Hardware Needed for Step 2:
2 (#1) Bottom Panels
2 (#21) Bolts
2 (#23) Washers
2 (#24) Nuts
Page 5