Setting on screen display, Setting the picture mode, Dynamic range control – Sharp Aquos LC 20DV20U User Manual

Page 41

Advertising
background image

40

Setting on screen display

On screen display can be switched on or off when

you press the DISPLAY button.

Press SETUP and the SETUP screen

displays.

Press

/

to select

(PICTURE), then

press or ENTER.

Press

/

to select “Display”.

Press

/

to select “On” or “Off”.

• If “Display” is not set to “On” on screen displays

do not appear when you press any buttons

except SUBTITLE, PLAY MODE, MARKER,

DIRECT SKIP and DISPLAY.

Press RETURN to return to the normal

screen.

1

2

3

4

5

Setting the picture mode

There are two types of source content in pictures

recorded in DVD video discs: fi lm content (pictures

recorded from fi lms at 24 frames per second) and

video content (video signals recorded at 30 frames

per second). Make this selection according to the type

of content being viewed.

Press SETUP and the SETUP screen

displays.

Press

/

to select

(PICTURE), then

press or ENTER.

Press

/

to select “Picture Mode”.

Press

/

to select your desired picture

mode.

1

2

3

5

Selected item

Description

Auto

Select this position normally. The DVD

player automatically detects source

content, fi lm or video, of playback

source.

Film

Suitable for playback of fi lm content

pictures.

Video

Suitable for playback of video content

pictures.

Press RETURN to return to the normal

screen.

Dynamic Range Control

DRC (Dynamic Range Control) enables you to control

the dynamic range so as to achieve a suitable sound

for your equipment.

Press SETUP and the SETUP screen

displays.

Press

/

to select

(AUDIO), then

press or ENTER.

Press

/

to select “DRC”.

Press

/

to select “On” or “Off”.

1

2

3

4

Selected item

Description

On

Loud sound such as explosion or

similar is toned down slightly when

played back. This makes it suitable for

when it is connected to a stereo.

Off

It plays back at the recording level on

the disc.

5

Press RETURN to return to the normal

screen.

NOTE

• This function works only during playback of Dolby Digital

recorded discs.

• The level of Dynamic Range Reduction may differ

depending on DVD video disc.

Function setup

4

DRC

/Setup/Return

Off

5X20431A_E_.indb 40

5X20431A_E_.indb 40

5/19/2006 6:35:46 PM

5/19/2006 6:35:46 PM

Advertising