Connecting to a power source – Samsung WB5500 User Manual

Page 14

Advertising
background image

013

Connecting to a Power Source

Ê SLB-11A rechargeable battery Specifi cation

Model

SLB-11A

Type Lithium

lon

Capacity 1130mAh
Voltage 3.8V
Charging time

Approximately 200 Minutes

You should use the rechargeable battery SLB-11A supplied with the
camera. Be sure to charge the battery before using the camera.

Ê Number of images and battery life: Using the SLB-11A

Battery life /

Number of images

Conditions

Still image

Approx. 120 MIN /
Approx. 240 shots

Using the fully charged battery,
Default settings, Program mode,
Shot to shot interval: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the fl ash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.

Movie

Approx. 120 MIN

Using the fully charged battery
640x480 image size
30fps frame rate

Ä These fi gures are measured under Samsung’s standard conditions

and shooting conditions and may vary depending on the user’s
methods.

Important information about battery usage.
å When camera is not in use, turn off the power.

å Please remove the battery if the camera will not be used

for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.

å Low temperatures (below 0°C) can affect the performance of

the battery and you may experience reduced battery life.

å Batteries will usually recover at normal temperatures.

å During extended use of the camera, the camera body may

become warm. This is perfectly normal.

Ŷ Connecting the AC adapter with the USB cable can be used as an

AC cable, and you can charge the rechargeable battery with the
AC cable.

- Using an AC cable:

Connect the AC adapter to the USB
cable. It can be used as a power
cable.

- Using a USB cable:

Remove the AC adapter.
You can download stored images to
your PC (p.108) or supply the power to
your camera through the USB cable.

Advertising