Settings ( ), Setting the usb, Selecting video out type – Samsung WB5500 User Manual

Page 74

Advertising

073

Settings ( )

- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc. .
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,

U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway etc. .

- When using a TV as an external monitor, you will need to select the

external or AV channel of the TV.

- There will be a digital noise on the external monitor, but it is not a

malfunction.

- If the image is not in the center of the screen, use the TV controls

to center it.

- When the camera is connected to an external monitor, some parts

of the image may not be displayed.

- When the camera is connected to an external monitor, the menu

will be visible on the external monitor and the menu functions are
the same as those indicated on the LCD monitor.

Setting the USB

If the camera is set to connect automatically to a PC or a printer using
a USB cable, you can manually set [Computer] or [Printer].

-[USB] sub menus:

[Auto]* :

Automatically enables an
external device connected with
a USB cable.

[Computer] : Sets computer connection

mode if the connected external
device cannot be recognized
automatically.

[Printer] :

Sets printer connection mode if the connected external
device cannot be recognized automatically.

The Video output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device
(monitor or TV, etc.) to which the camera is connected. PAL
mode can support only BDGHI.

Ê Connecting to an external monitor

When the camera is connected to an

external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor.

Selecting Video out type

Back Set

AF Lamp

:On

Anynet+ (HDMI-CEC)

:On

HDMI Size

:1080i

Video Out

:NTSC

USB

:Auto

Auto Power Off

:3 min

Auto
Computer
Printer

Yellow - Video

White - Sound