Samson XM910 - Manual (Page 14)

12
DJ Crossfader
The XM910 has a built-in DJ mixer, which can
be used to mix line level sources like CD or
tape players. Like other high quality DJ mixers,
the XM910 has a removable crossfader featur-
ing a smooth linear taper. The Crossfader is
used to mix between the CD1 input and the
CD/TAPE 2.
CD 1 – Input Level Control
The CD 1 input volume control is used to adjust
the volume of the signal connected to the CD 1
input. When using the DJ mixer, or for just play-
ing back a signal from a CD, MP3 player, cas-
sette tape or other stereo device like DVD or
VCR or computer sound card output, use the
CD 1 level control to set the perfect level. Be
sure to set the DJ crossfader all the way to the
left side.
CD 2 – Input Level Control
The CD 2 input volume control is used to adjust
the volume of the signal connected to the CD 2
input. When using the DJ mixer, or for just play-
ing back a signal from a CD, MP3 player, cas-
sette tape or other stereo device like DVD or
VCR or computer sound card output, use the
CD 2 level control to set the perfect level. Be
sure to set the DJ crossfader all the way to the
right side.
Controls and Functions
DJ MIXER SECTION
Offering extreme flexibility for today’s working musicians, the XM910 incorporates an on-board, two channel
stereo DJ mixer. The following section details the control functions used in the XM910’s DJ mixers section.
29
30
31
29
30 31