Sunbeam SMW1100 - Manual (Page 11)

from 1 to 9.
3. Touch START/STOP to start cooking.
timer, sets minutes and seconds from
left to right so a single digit can be set
(5 for S seconds) or up to 4 digits
(2405 for 24 minutes 5 seconds).
, 3. Touch START/STOP pad.
7 0 %
NOTE:
6 6 0 %
l After time has elapsed four beeps
5 5 0 %
sound and END appears in display.
4 4 0 %
3 3 0 %
Touch RESET pad or open door to
2 20%
clear END before starting another
1 1 0 %
B. Two-stage Cooking
cooking function.
Some recipes require different stages of
setting SPEED DEFROST, oven
cooking at different temperatures.
can be programmed to automatically
1. SET STAGE 1:
switch to one or two-stage cooking.
Follow steps 1 and 2 in “One-stage
A. For speed defrost and one stage
Cooking”.
cooking, follow steps above. Before
DO NOT TOUCH START/STOP PAD.
touching START/STOP pad, touch
2. SET STAGE 2:
COOK pad, enter time and power
Touch COOK pad then enter proper
level. Then touch START/STOP pad.
cooking time and (lower) power level.
B. For speed defrost and two stage
(Most 2-stage recipes use lower power
cooking, follow steps above. Before
for second stage.)
touching START/STOP pad, enter
3, Touch START/STOP pad.
two-stage cooking programs.
N O T E :
After stage 1 time has elapsed, two
SETTING “COOK BY WEIGHT"
beeps sound, signaling the beginning of
1. Touch COCK BY WEIGHT pad.
stage 2. After total time has elapsed, 4
2. Enter the one-digit code by touching
beeps sound and END appears in
correct number pad..
display. Touch RESET pad or open oven
3. Enter weight.
4. Touch START/STOP PAD.
door to dear END.
NOTE:
SETTING “SPEED DEFROST”
Your microwave oven makes cooking
1. Touch SPEED DEFROST pad.
easy. You set the type and weight of
2. Enter desired defrosting time by
food, and the oven automatically sets
touching correct number pads. Digital
time and power level.
10
t h e